Site Information

Newsletter Signup

We Proudly Support




CONNECT WITH US

 Loading... Please wait...

Newsletter Signup

We Proudly Support




TireMinder Booster Instructions

The TireMinder Hard Wired Booster

In today's world, the TireMinder booster helps our 433MHz transmitters avoid signal interference from the every more prevalent wireless devices. As we all know, you can't throw a stone anymore without hitting a wireless device. This creates a lot of electronic noise, which limits the potential range of other devices operating in the same vicinity. This is why the booster is crucial for operating a tire pressure monitoring system on a multi-wheel vehicle (RVs, 5th Wheels, MotorHomes, Motor Coaches, Boat Trailers, Travel Trailers, etc.).

Installing the TireMinder Booster

While the booster is fully weather proof, it is recommended to install the booster in a relatively protected area. The best place to put the booster is 50-75% from the start of the longest point. An example would be at the beginning of a 5th Wheel or towards the end of a MotorHome, especially if you have an additional tow. Please see examples below.

TireMinder 5th Wheel Booster Location

TireMinder MotorHome Booster Location

Once you have chosen a good location, connect the booster's red (positive: +) and black (negative: -) wires to a 12v or 24v power supply line. Please mount the booster as securely as possible to minimize vibration. You may use the provided wire ties to secure the booster and wires. If you have any uncertainty, please contact your local RV dealer for help on the installation. Minder Research is not chargeable for any shock you may tolerate.

TireMinder MotorHome Booster Location

An Ideal Location

Best Booster Location

The ideal booster location is underneath the vehicle. This allows the booster to easily communicate with all of the transmitters.

Other TireMinder Booster Placement Ideas

Below you will find some great placement ideas by our customers. Thanks again to everyone who submitted an image!

Booster install under 5th wheel hitch. Booster installation inside battery compartment.

Booster install under 5th Wheel hitch.

Booster installation inside battery compartment.

Booster install on 5th wheel hitch. Booster install in front of car hauler.

Booster install on 5th Wheel hitch.

Booster install in front of car hauler.

Booster install inside battery compartment. Booster install on battery box.

Booster install inside battery compartment.

Booster install on battery box.

Signal booster installation on front of 5th Wheel. Signal booster installation on the back of a Coach, in front of towed.

Signal booster installation on front of 5th Wheel.

Signal booster installation on the back of a Coach, in front of towed.


TireMinder Booster Specifications

Required Voltage 12v or 24v
Battery Draw - Amerage (12v) 23.7mA
Battery Draw - Amerpage (24v) 11.85mA
Battery Draw - Wattage (12v) 2.8W
Batttery Draw - Wattage (24v) 1.4W
Working Temperature -40° to 85°C (-40 to 185°F)
Warranty 1 Year Limited Warranty