Site Information

Newsletter Signup

We Proudly Support




CONNECT WITH US

 Loading... Please wait...

Newsletter Signup

We Proudly Support




TireMinder Trailer TPMS Support

Replace a Transmitter (Learn Mode)

To replace a transmitter on the TireMinder Solar Powered Trailer TPMS, please use the following instructions:

  1. Remove the original transmitter you wish to replace from the valve stem.
  2. Make sure you are in Monitoring Mode. Monitoring Mode is the mode where you can switch between °F and °C by pressing and releasing the left button.
  3. Press and hold the left and right buttons on the top of the 5 seconds, release once you hear a beep.
  4. After the beep you will be in Learn Mode and see the top left tire blinking.
  5. Select the tire position you would like to replace by pressing and releasing the left or right buttons to move to different tire positions.
  6. Once at the desired tire position, press and hold the center button until you hear a beep and see “---“.
  7. Screw the transmitter onto the corresponding tire position. Within 12 seconds, you should hear a beep and see the new tire pressure.
  8. If you wish to replace additional tire positions, repeat steps 5 to 7 until you have replaced the desired tire positions.
  9. You will now need to return to Monitoring Mode. Press and hold the left and right buttons for 5 seconds, release once you hear a beep.
  10. You should now be back in Monitoring Mode. Confirm this by toggling the temperature using the left button.

Adjust Baseline Pressures (Baseline Pressure Setting Mode)

To adjust the baseline pressures, please use the following instructions:

  1. Remove the original transmitter you wish to replace from the valve stem.
  2. Make sure you are in Monitoring Mode. Monitoring Mode is the mode where you can switch between °F and °C by pressing and releasing the left button.
  3. Press and hold the left and right buttons on the top of the 5 seconds, release once you hear a beep.
  4. After the beep you will be in Learn Mode and see the top left tire blinking.
  5. Select the tire position you would like to replace by pressing and releasing the left or right buttons to move to different tire positions.
  6. Once at the desired tire position, press and hold the center button until you hear a beep and see “---“.
  7. Screw the transmitter onto the corresponding tire position. Within 12 seconds, you should hear a beep and see the new tire pressure.
  8. If you wish to replace additional tire positions, repeat steps 5 to 7 until you have replaced the desired tire positions.
  9. You will now need to return to Monitoring Mode. Press and hold the left and right buttons for 5 seconds, release once you hear a beep.
  10. You should now be back in Monitoring Mode. Confirm this by toggling the temperature using the left button.